Menu User Tool Setting Requirements
Interface Settings/Network DNS Configuration As required
Interface Settings/Network DDNS Configuration As required
Interface Settings/Network IPsec As required
Interface Settings/Network Domain Name As required
Interface Settings/Network WINS Configuration As required
Interface Settings/Network Effective Protocol Necessary
Interface Settings/Network LAN Type Necessary
Interface Settings/Network Permit SNMPv3 Communication As required
Interface Settings/Network Permit SSL / TLS Communication As required
Interface Settings/Network Host Name As required
Interface Settings/Wireless LAN Communication Mode Necessary
Interface Settings/Wireless LAN SSID Setting As required
Interface Settings/Wireless LAN Ad-hoc Channel As required
Interface Settings/Wireless LAN Security Method As required
File Transfer Delivery Option Necessary
File Transfer Fax RX File Transmission As required
File Transfer Scanner Resend Interval Time As required
File Transfer Number of Scanner Resends As required
• For the Effective Protocol setting, check that the protocol you want to use is set to [Active].
• [Wireless LAN] and [LAN Type] are displayed when the wireless LAN interface board is installed.
When both Ethernet and wireless LAN are connected, the selected interface takes precedence.
• If Delivery Option is set to [On], check that IPv4 Address is specified.
• p.33 "Interface Settings"
• p.41 "File Transfer"
Network Settings Required to Use the Network Delivery Scanner
91
To Next Page
Loading...
Need help?
General
