EasyManuals Logo

Ricoh MP C401 Series User Manual

Ricoh MP C401 Series
228 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #109 background imageLoading...
Page #109 background image
Step 1: Confirming the user name and computer name
Confirm the user name and the name of the computer you will send scanned documents to.
1. On the [Start] menu, point to [All Programs], then [Accessories], and then click on
[Command Prompt].
2. Enter the command "ipconfig/all", and then press the [Enter] key.
3. Confirm the name of the computer.
The computer's name is displayed under [Host Name].
You can also confirm the IPv4 address. The address displayed under [IPv4 Address] is the IPv4
address of the computer.
4. Next, enter the command "set user", and then press the [Enter] key. (Be sure to put a
space between "set" and "user".)
5. Confirm the user name.
The user name is displayed under [USERNAME].
Step 2: Creating a shared folder on a computer running Microsoft Windows
Create a shared destination folder in Windows and enable sharing. In the following procedure, a
computer which is running under Windows 7 Ultimate and participating in a domain is used as an
example.
You must log in as an Administrators group member to create a shared folder.
If "Everyone" is left selected in Step 6, the created shared folder will be accessible by all users. This
is a security risk, so we recommend that you give access rights only to specific users. Use the
following procedure to remove "Everyone" and specify user access rights.
1. Create a folder, just as you would create a normal folder, in a location of your choice on
the computer.
2. Right-click the folder, and then click [Properties].
When using Windows XP, right-click the folder, and then click [Sharing and Security].
3. On the [Sharing] tab, select [Advanced Sharing...].
When using Windows XP, on the [Sharing] tab, select [Share this folder]. Proceed to Step 5.
4. Select the [Share this folder] check box.
5. Click [Permissions].
6. In the [Group or user names:] list, select "Everyone", and then click [Remove].
7. Click [Add...].
8. In the [Select Users or Groups] window, click [Advanced...].
Basic Procedure When Using Scan to Folder
107

Table of Contents

Other manuals for Ricoh MP C401 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh MP C401 Series and is the answer not in the manual?

Ricoh MP C401 Series Specifications

General IconGeneral
Print TechnologyLaser
Resolution1200 x 1200 dpi
FunctionsPrint, Copy, Scan, Fax
Duplex PrintingYes
Monthly Duty CycleUp to 150, 000 pages
Copy Resolution600 x 600 dpi
Fax Speed33.6 kbps
Processor533 MHz
Operating System CompatibilityWindows, Mac OS, Linux
Print Speed40 ppm (A4)
ConnectivityUSB, Ethernet
Supported Paper SizesA3, A4, A5, B4, B5, Letter, Legal, Executive, Folio
Scanner TypeFlatbed, ADF
Scan Resolution600 dpi
Copy Speed40 cpm (A4)
Control Panelcolor touchscreen
Memory1.5 GB RAM

Related product manuals