Canceling a Transmission
This section explains how to cancel a fax transmission.
Canceling a Transmission Before the Original Is Scanned
Use this procedure to cancel a transmission before pressing the [Start] key.
1. Cancel sending.
• When using the standard operation panel
Press the [Reset] key.
• When using the Smart Operation Panel
Press [Reset] on the top right of the screen.
Canceling a Transmission While the Original Is Being Scanned
Use this procedure to cancel scanning or transmitting of the original while it is being scanned.
If you cancel a transmission using the standard memory transmission function, you need to follow a
different procedure to cancel the transmission. See page 89 "Canceling a Transmission After the
Original Is Scanned".
4. Fax
88
To Next Page
Loading...
