When the User Lacks Privileges to Perform an Operation
Message Causes Solutions
"You do not have the
privileges to use this
function."
The logged in user name
does not have permissions
for the selected function.
For details about how to set
permissions, see Security Guide.
"The selected file(s)
contained file(s) without
access privileges. Only
file(s) with access privileges
will be deleted."
You have tried to delete files
without the permission to do
so.
To check your access permission for
stored documents, or to delete a
document you do not have permission
to delete, see Security Guide.
When the LDAP Server Cannot Be Used
Message Causes Solutions
"Connection with LDAP
server has failed. Check the
server status."
A network error has
occurred and connection
has failed.
Try the operation again. If the message
is still displayed, the network may be
busy.
Check the settings for LDAP server in
[System Settings]. For details about
settings for LDAP server, see
"Programming the LDAP Server ",
Connecting the Machine/ System
Settings.
"Exceeded time limit for
LDAP server search. Check
the server status."
A network error has
occurred and connection
has failed.
• Try the operation again. If the
message is still displayed, the
network may be busy.
• Check that the correct settings for
LDAP server are listed in
[Administrator Tools] of [System
Settings]. For details about LDAP
server, see "Programming the
LDAP Server ", Connecting the
Machine/ System Settings.
"LDAP server authentication
has failed. Check the
settings."
A network error has
occurred and connection
has failed.
Configure settings correctly for the user
name and the password for LDAP
server authentication.
When Other Messages Appear
213
To Next Page
Loading...
Need help?
General
