Basic Procedure for Sending Scan Files by E-
mail
1. Display the initial scanner screen.
• When using the standard operation panel
Press the [Home] key on the bottom left of the control panel, and press the [Scanner] icon on
the [Home] screen.
• When using the Smart Operation Panel
Press the [Home] key on the top left of the control panel. Flick the screen to the left, and then
press the [Scanner] icon on the Home screen 4.
2. Make sure that no previous settings remain.
If a previous setting remains, press the [Reset] key.
3. Press the [Email] tab.
4. Place originals.
6. Scan
114
To Next Page
Loading...
