Ricoh MP C401 Series User Manual

Message Causes Solutions
"Connection with the remote
machine has failed. There is
a problem with the remote
machine structure. Contact
the administrator."
The settings or machine
configurations for using the
remote fax function to
connect to the main machine
are incorrect.
For details about the settings and
machine configurations for using the
remote fax function to connect to a
main machine, contact your
administrator.
"Transfer error has occured.
Check the status of the
remote machine."
A network error occurred
during transfer.
• Check that the correct IP address
or host name is set for the main
machine in [System Settings]. For
details about these settings,
contact your administrator.
• Check that the main machine is
working correctly.
• Check that the LAN cable is
correctly connected to the
machine.
• For details about transmission,
contact your administrator.
"The HDD of the remote
machine is full."
The hard disk became full
after using the remote fax
function to scan an original.
Delete unnecessary files.
Messages Displayed When You Use the Facsimile Function
177

Ricoh MP C401 Series Specifications

General

Print Technology	Laser
Resolution	1200 x 1200 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Monthly Duty Cycle	Up to 150, 000 pages
Copy Resolution	600 x 600 dpi
Fax Speed	33.6 kbps
Processor	533 MHz
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	40 ppm (A4)
Connectivity	USB, Ethernet
Supported Paper Sizes	A3, A4, A5, B4, B5, Letter, Legal, Executive, Folio
Scanner Type	Flatbed, ADF
Scan Resolution	600 dpi
Copy Speed	40 cpm (A4)
Control Panel	color touchscreen
Memory	1.5 GB RAM