Ricoh MP C401 Series User Manual

Message Causes Solutions
"Cannot start scanning
because communication was
failed."
The [Take no action] setting
has been selected on the
client computer, forcing the
client computer to remain
inactive when it receives
scan data.
Open scanner properties, click the
[Events] tab, and then select [Start this
program] as the computer's response
when it receives scan data. For details,
see your operating system's Help.
"Cannot start scanning.
Check the setting(s) on the
PC."
The Scan Profile might be
incorrectly configured.
Check the Scan Profile configuration.
"Could not send the data
because the PC timed out
before it was sent."
A time out occurred when
WSD Scanner was used.
Time outs occur when too
much time passes between
scanning an original and
sending its data. The
followings are likely causes
of time outs:
• Too many originals per
set.
• Misfed originals.
• Transmission of other
jobs.
• Reduce the number of originals,
and then scan again.
• Remove any misfed original, and
then scan again.
• Use Scanner Journal to check
there are no jobs awaiting
transmission, and then scan
again.
Messages Displayed When You Use the Scanner Function
199

Ricoh MP C401 Series Specifications

General

Print Technology	Laser
Resolution	1200 x 1200 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Monthly Duty Cycle	Up to 150, 000 pages
Copy Resolution	600 x 600 dpi
Fax Speed	33.6 kbps
Processor	533 MHz
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	40 ppm (A4)
Connectivity	USB, Ethernet
Supported Paper Sizes	A3, A4, A5, B4, B5, Letter, Legal, Executive, Folio
Scanner Type	Flatbed, ADF
Scan Resolution	600 dpi
Copy Speed	40 cpm (A4)
Control Panel	color touchscreen
Memory	1.5 GB RAM