Ricoh MP C401 Series User Manual

Message Causes Solutions
"Scanner is not available.
Check the scanner
connection status."
Network communication is
not available because the
machine's IP address could
not be obtained from the
host name. If only "IPv6" is
set to [Active], the IPv6
address might not be
obtained.
• Check whether the machine's host
name is specified in the Network
Connection Tool. For the WIA
driver, check the [Network
Connection] tab in the properties.
• Use Web Image Monitor to set
"LLMNR" of "IPv6" to [Active].
• In Windows XP, IPv6 address
cannot be obtained from the host
name. Specify the machine's IPv6
address in the Network
Connection Tool.
10. Troubleshooting
206

Ricoh MP C401 Series Specifications

General

Print Technology	Laser
Resolution	1200 x 1200 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Monthly Duty Cycle	Up to 150, 000 pages
Copy Resolution	600 x 600 dpi
Fax Speed	33.6 kbps
Processor	533 MHz
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	40 ppm (A4)
Connectivity	USB, Ethernet
Supported Paper Sizes	A3, A4, A5, B4, B5, Letter, Legal, Executive, Folio
Scanner Type	Flatbed, ADF
Scan Resolution	600 dpi
Copy Speed	40 cpm (A4)
Control Panel	color touchscreen
Memory	1.5 GB RAM