Ricoh MP C401 Series User Manual

Energy efficiency
The amount of electricity a machine consumes depends as much on its specifications as it does on
the way you use it. The machine is designed to allow you to reduce electricity costs by switching to
Ready mode after it prints the last page. If required, it can immediately print again from this mode.
If no additional prints are required and a specified period of time passes, the device switches to an
energy saving mode.
In these modes, the machine consumes less power (watts). If the machine is to print again, it needs
a little longer to return from an energy saving mode than from Ready mode.
For maximum energy savings, we recommend that the default setting for power management is
used.
Products that comply with the Energy Star requirement are always energy efficient.
Notes to users in the state of California (Notes to Users in USA)
(mainly North America)
Perchlorate Material - special handling may apply. See: www.dtsc.ca.gov/hazardouswaste/
perchlorate
Information on Environmental Regulations
217

Ricoh MP C401 Series Specifications

General

Print Technology	Laser
Resolution	1200 x 1200 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Monthly Duty Cycle	Up to 150, 000 pages
Copy Resolution	600 x 600 dpi
Fax Speed	33.6 kbps
Processor	533 MHz
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	40 ppm (A4)
Connectivity	USB, Ethernet
Supported Paper Sizes	A3, A4, A5, B4, B5, Letter, Legal, Executive, Folio
Scanner Type	Flatbed, ADF
Scan Resolution	600 dpi
Copy Speed	40 cpm (A4)
Control Panel	color touchscreen
Memory	1.5 GB RAM