Ricoh MP CW2200SP - Page 125

2. Press [Input Paper Settings].
3. Press [Printer Bypass Paper Size].
4. Select the paper size.
5. Press [OK].
6. Press the [User Tools/Counter] key.
Specifying a custom size of cut paper using the control panel
1. Press the [User Tools/Counter] key.
CJS039
2. Press [Input Paper Settings].
3. Press [Printer Bypass Paper Size].
4. Press [Custom Size].
If a custom size is already specified, press [Change Size].
5. Press [Vertical].
Loading Paper into the Paper Bypass Location
123