• An adjustment sensor failure occurred while performing an adjustment.
1. Press the [User Tools/Counter] key.
2. Press [Maintenance].
3. Press [Auto Adjust Head Position].
4. Select the items of the head position you want to adjust, and then press [Adjustment].
The print quality you need to select differs depending on the write mode you want to adjust the
head position for.
• Select [Standard] for normal printing.
• Select [Speed Priority] to prioritize the adjustment time.
• Select [Quality Priority] to prioritize the print quality.
5. Press [Exit].
If Auto Adjust Head Position has failed, perform Manual Adjust Head Position.
6. Press the [User Tools/Counter] key.
• Auto Adjust Head Position cannot be performed when "Paper Type" is set to [Film (Matted)].
Perform Manual Adjust Head Position.
• Auto Adjust Head Position cannot be performed for the paper bypass location. Perform Manual
Adjust Head Position.
9. Troubleshooting
168
To Next Page
Loading...
