Coverage
Displays the number of paper misfeeds with tray 1 or tray
2.
Coverage1 (Tray 1)/ Coverage2 (Tray2)
Print Reports
G3 Protocol dump list
G3 protocol dump of the latest communication is printed.
(G181 doesn't support this)
Off (Default)/ Error/ On
Engine Maintenance
Init Engine EEPROM
This clears all counters except "Full Color" and "Black and White" in the total
counter.
When you execute "Init Engine EEPROM", the engine EEPROM is initialized.
Turn the machine power off/on after you change this setting.
Model
Displays only
1: PE-P1a
2: PE-P1b
3: PE-P1c
Displays the current model in a dropdown list.
Do not change this setting (Designed for Factory Use).
Brand ID
00* – 7F
Displays the current brand ID number.
Do not change this setting (Designed for Factory Use).
Maintenance ID
00* – 7F
Displays the current maintenance ID number.
Do not change this setting (Designed for Factory Use).
LSU Adjustment
Input 160 bytes
setting.
Character: alphanumeric "0-9", "a-f", "A-F", only valid
data can be input.
Input length: 160 bytes
Trans. Belt Adjust
When you execute "Trans. Belt Adjust", the transfer belt adjustment is done. This
calibrates the motor speed to match the length of the new transfer belt.
Service Menu (MF Model)
141
To Next Page
Loading...
