Ricoh PE-P1 - Page 143

Fuser SC Detect On/Off*
If On, the engine detects SC559. If Off, the engine does
not detect "Fusing SC Reset".
Color Registration
The engine will do color registration and density tuning automatically.
The printer will warm up automatically after this setting is changed.
Reset Transfer Unit
Life Counter
Resets the transfer unit life counter.
Fuser SC Reset This button is for resetting an SC related with the fusing errors.
Toner Limit
Text
Determines the maximum amount of ink/toner you can use
in any area of your text. This is where you are controlling
exactly how much ink will be used during printing.
[200 to 400 / 250 (Default)/ 10/step]
Setting 0: Off
Graphic
Determines the maximum amount of ink/toner you can use
in any area of your graphic. This is where you are
controlling exactly how much ink will be used during
printing.
[200 to 400 / 250 (Default)/ 10/step]
Setting 0: Off
Image
Determines the maximum amount of ink/toner you can use
in any area of your image. This is where you are controlling
exactly how much ink will be used during printing.
[200 to 400 / 250 (Default)/ 10/step]
Setting 0: Off
P
N
P Name
NA Model: RICOH/ 'nul'
EU Model: RICOH/ NRG/ LANIER
ASIA Model: RICOH/ LANIER
China Model: RICOH
Destination
Sets the destination and updates the engine setting.
JPN/ NA (Default)/ EU/ ASIA/ China
2nd Transfer Fuser
Temp.
2nd Transfer Front
Adjusts the transfer roller current, based on the default
value.
[-15 to 15 / 0 (Default) / 1 μA/step]
5. Service Tables
142
5