Ricoh Pro C5110S - Page 116

91: [Letter Fold-out Posn 1: Single-sheet Fld]
Adjust the fold position for the bottom segment (S2) of letter fold-out sheets when using the multi-folding
unit.
This setting will not be applied when the multi-sheet fold function is enabled.
Press [+] to increase (S2) and [−] to reduce it.
The mark indicates the leading edge (relative to the paper feed direction), and the mark indicates
the trailing edge.
CEZ003
L
S2
Paper feed direction
Setting Items Max. Value Min. Value Step Unit
[Adjust Letter Fold-out Position 1: Single-
sheet Fold]
4.0
*1
-4.0
*1
0.2 mm
*1
For B5 paper, any adjustment greater than 3 mm is rounded down to 3 mm.
92: [Letter Fold-out Posn 2: Single-sheet Fld]
Adjust the overall fold size (L) of letter fold-out sheets when using the multi-folding unit.
This setting will not be applied when the multi-sheet fold function is enabled.
Press [+] to increase (L) and [−] to reduce it.
The mark indicates the leading edge (relative to the paper feed direction), and the mark indicates
the trailing edge.
4. Details of Menu Items in Advanced Settings
114