2. Details of Menu Items in Adjustment
Settings for Skilled Operators
Menu Items and Functions
[Machine: Image Position]
For details about the following items, see page 23 "[Machine: Image Position]".
No. Item Description
0101 [Adjust Image Position With
Feed Direction]
Adjust the horizontal position of the print image.
0102 [Adjust Image Position
Across Feed Direction]
Adjust the vertical position of the print image.
0107 [Adjust Erase Margin With
Feed Direction]
Adjust the mask width at the leading edge, trailing edge,
left edge, or right edge of the image.
[Machine: Image Quality]
For details about the following items, see page 28 "[Machine: Image Quality]".
No. Item Description
0201 [Adjust Image Density/
DEMS]
Execute image density control manually.
DEMS can reduce the variations in thickness that occur in
the intervals between the photoconductor and
development sleeve operations.
0202 [Image Density Adjustment
Execute Interval]
Specify the number of sheets the machine prints in full
color before it automatically adjusts image density.
0203 [Adjust Maximum Image
Density]
Specify the adhesion of toner to the drum surface and
intermediate transfer belt when image density adjustment
is executed.
0204 [Adjust Line Width] Adjust the intensity of the laser for transferring image
data to the drum.
0205 [Adjust Density Difference
Across Feed Direction]
Adjust the image density difference between the top and
bottom of the image.
17
To Next Page
Loading...
