Setting Values
Paper Feed Adjustment
01: [Wide LCT Fan Setting]
Specify the movement of the Wide LCT fan.
If you set this to [On], air is discharged from the duct in the paper tray. By blowing air between the
sheets, sheets stuck to each other can be separated.
Setting Items Values
[Wide LCT Fan Setting] [On]
[Off]
02: [Adjust Wide LCT Fan Level]
Adjust the capacity of the Wide LCT fan.
If double feeding or misfeeding of paper occurs when this setting is at its default value, increase the fan
capacity.
Press [+] to increase the fan capacity and [−] to reduce it.
Setting Items Max. Value Min. Value Step Unit
[Adjust Wide LCT Fan Level] 100 10 10 %
03: [Pickup Assist Setting]
Specify the paper feed roller movement.
If the paper feed roller fails to pick up paper and misfeeding of paper occurs, set this to [On].
Setting Items Values
[Pickup Assist Setting] [On]
[Off]
4. Details of Menu Items in Advanced Settings
80
To Next Page
Loading...
