0109: [Adjust Wide LCT Fan Timer]
Adjust the duration of the airflow of the wide LCT for fanning the sheets.
The wide LCT (Trays 3 to 5) fans sheets by blowing air between the sheets before feeding them.
By increasing the duration of the airflow, you can reduce multiple feeding and paper jams when printing
on coated or thick paper.
Press [+] to increase the duration of the airflow or [−] to decrease it.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[Tray 3] 3 10 1 1 second(s)
• Increasing the duration of the airflow may reduce throughput.
0110: [Pickup Assist Setting]
Specify the paper feed roller movement.
If the paper feed roller fails to pick up slippery paper such as coated paper, and misfeeding of paper
occurs, set this to [On].
Setting Items Values Default Value
[Tray 3] [Auto Select]
[On]
[Off]
[Auto Select]
• This setting is not effective for paper fed from paper trays with custom paper presets. For such
paper, the value specified in [Pickup Assist Setting] in [Advanced Settings] takes precedence.
[Finishing: Finisher]
0401: [Adjust Punch Position Across Feed Direction]
Adjust the vertical position of the punch holes when using Finisher SR4090 or Finisher SR4100.
Press [+] to move the position forward (up), or [−] to move it backward (down).
2. Details of Menu Items in Adjustment Settings for Skilled Operators
38
To Next Page
Loading...
