In [Special Mode], the replacement cycle of the cleaning unit for the PCU is shorter because of the
increased amount of lubricant that is applied.
If you reset the counter after replacing the cleaning unit for the PCU, [Special Mode] is reset to its factory
setting.
Setting Items Values Default Value
[Special Mode Selection: Black] [Default]
[Special Mode]
[Default]
[Special Mode Selection: Cyan]
[Special Mode Selection: Magenta]
[Special Mode Selection: Yellow]
0210: [Fusing Belt Smoothing]
Polish the fusing belt to eliminate the scratches caused by paper edges.
Setting Items Values
[Smooth Fusing Belt] Press [OK].
0211: [Fusing Ability by Paper Feed Speed]
Specify appropriately to improve transferability to thick paper.
Setting Items Values Default Value
[Paper Feed Speed Mode] [Standard]
[Thick Paper Priority]
[Standard]
[Machine: Paper Feed/ Output]
0103: [Adjust Registration Paper Buckle]
Adjust the degree of paper arching at the registration gate.
If the paper arching is too small or too large, the image may be misaligned or the paper may become
skewed.
This setting is only effective for paper of Paper Weight 1 to 4.
2. Details of Menu Items in Adjustment Settings for Skilled Operators
32
To Next Page
Loading...
