Paper Delivery Adjustment
04: [Paper Weight Detection]
Specify whether or not to detect the paper weight.
If set to [On], a message appears on the control panel when the paper weight sensor detects paper of a
weight other than that specified in [Tray Paper Settings].
Thin, heavy paper (such as coated paper) may cause the paper weight to be misdetected. When using
such paper, set this to [Off] to prevent misdetection.
Setting Items Values
[Paper Weight Detection] [On]
[Off]
05: [Double Feed Detect]
Specify whether or not to detect double feeding of paper.
If this is set to [On], the machine stops when it detects paper double feeding, so as to prevent mixing of
unprinted paper.
The machine may not correctly detect double feeding when using special paper (two-ply paper such as
release paper). In such a case, set this to [Off].
Setting Items Values
[Double Feed Detection] [On]
[Off]
Image Position/Scaling Adjustment
06: [Adj Image Position of Side1 With Feed]
Adjust the horizontal position of the image to be printed on Side 1 of the paper.
Press [+] to shift the image to the right (trailing edge).
Press [−] to shift the image to the left (leading edge).
Setting Values
81
To Next Page
Loading...
