• When using paper smaller than A3 (11 × 17 inches), the cleaning web separates regardless of this
setting.
Setting Items Values
[Cleaning Web Contact and Disengage] [On]
[Off]
85: [Fusing Nip Width Adj. for Envelope]
Adjust the nip width between the fusing belt and pressure roller when an envelope is being fed. If the
envelope becomes wrinkled, press [−] to reduce the nip width. If a fusing error develops on the
envelope, press [+] to increase the nip width. Increasing the nip width too much may cause the envelope
to become wrinkled.
Setting Items Max. Value Min. Value Step Unit
[Fusing Nip Width Adjustment for
Envelope]
2000 0 1 msec
Decurler Adjustment
86: [Paper Curl Correction Level]
Adjust the degree of paper decurling by the decurler unit.
Select between "1" (weak) and "5" (strong).
Setting Items Max. Value Min. Value Step Unit
[Paper Curl Correction Level] 5 1 1 None
87: [Adjust Paper Curl Correction Level]
Adjust the contact pressure between the soft roller and metal roller in the decurler unit.
Use this to make fine adjustment in addition to the five-level adjustment made in 86: [Paper Curl
Correction Level].
Press [+] to increase the contact pressure and [−] to reduce it.
Setting Values
111
To Next Page
Loading...
