paper with a feed length of more than 220 mm (8.66 inches) is used, both Shift Systems 1 and 2
can be used.
Setting Items Max. Value Min. Value Step Unit
[2 sided Transport Roller Shift Adjustment
1]
3.0 -3.0 0.1 %
31: [2 sided Transport Roller Shift Adj 2]
Adjust the roller's shift amounts produced by Shift System 2 in the horizontal duplex paper transfer unit
for duplex printing.
Press [+] to increase the degree of shift and [−] to reduce it.
• The machine adjusts the vertical position of Side 2 (relative to the main scanning direction) by the
shifting movement of the horizontal duplex paper transfer unit for duplex printing. When paper with
a feed length of 220 mm (8.66 inches) or less is used, only Shift System 2 can be used. When
paper with a feed length of more than 220 mm (8.66 inches) is used, both Shift Systems 1 and 2
can be used.
Setting Items Max. Value Min. Value Step Unit
[2 sided Transport Roller Shift Adjustment
2]
3.0 -3.0 0.1 %
32: [Deactivate 2 sided Trnsprt Roller Shift]
Disable the shift operation performed by the duplex transfer unit.
If set to [On], neither Shift System 1 or 2 operates.
Setting Items Values
[Deactivate 2 sided Transport Roller Shift] [On]
[Off]
Toner Adhesion Adjustment
33: [Adjust Toner Adhesion (Black)]
Adjust the intermediate transfer belt toner adhesion for black.
4. Details of Menu Items in Advanced Settings
92
To Next Page
Loading...
