Use this to adjust the density and color of the printed image. Depending on the paper being used, it may
be necessary to make this adjustment to achieve optimal toner adhesion.
Press [+] to increase the toner adhesion and [−] to reduce it.
Setting Items Max. Value Min. Value Step Unit
[Adjust Toner Adhesion (Black)] 5 -5 1 None
34: [Adjust Toner Adhesion (Cyan)]
Adjust the intermediate transfer belt toner adhesion for cyan.
Use this to adjust the density and color of the printed image. Depending on the paper being used, it may
be necessary to make this adjustment to achieve optimal toner adhesion.
Press [+] to increase the toner adhesion and [−] to reduce it.
Setting Items Max. Value Min. Value Step Unit
[Adjust Toner Adhesion (Cyan)] 5 -5 1 None
35: [Adjust Toner Adhesion (Mgenta)]
Adjust the intermediate transfer belt toner adhesion for magenta.
Use this to adjust the density and color of the printed image. Depending on the paper being used, it may
be necessary to make this adjustment to achieve optimal toner adhesion.
Press [+] to increase the toner adhesion and [−] to reduce it.
Setting Items Max. Value Min. Value Step Unit
[Adjust Toner Adhesion (Magenta)] 5 -5 1 None
36: [Adjust Toner Adhesion (Yellow)]
Adjust the intermediate transfer belt toner adhesion for yellow.
Use this to adjust the density and color of the printed image. Depending on the paper being used, it may
be necessary to make this adjustment to achieve optimal toner adhesion.
Press [+] to increase the toner adhesion and [−] to reduce it.
Setting Items Max. Value Min. Value Step Unit
[Adjust Toner Adhesion (Yellow)] 5 -5 1 None
Setting Values
93
To Next Page
Loading...
