No. Item Description
0207 [Adjust Fusing Temperature
on Standby]
Adjust the set fusing temperature according to the
machine status.
0208 [Auto Color Selection
Setting]
Specify the number of sheets the machine prints in full
color mode before switching to black-and-white mode
when printing a job which involves full color printing
followed by black-and-white printing.
0209 [Photoconductor Special
Mode]
Increase the amount of lubricant applied to the
photoconductor.
0210 [Fusing Belt Smoothing] Polish the fusing belt to eliminate the scratches caused by
paper edges.
0211 [Fusing Ability by Paper
Feed Speed]
Specify appropriately to improve transferability to thick
paper.
[Machine: Paper Feed/ Output]
For details about the following items, see page 32 "[Machine: Paper Feed/ Output]".
No. Item Description
0103 [Adjust Registration Paper
Buckle]
Adjust the degree of paper arching at the registration
gate.
0104 [Adjust Registration Paper
Buckle (Thick Paper)]
Adjust the degree of paper arching at the registration
gate when using paper of Paper Weight 5 to 7.
0106 [Criteria for Paper Weight] Specify the criteria for identifying the paper weight.
0140 [Buffer Pass Unit Fan
Activation Setting]
Select when the buffer pass unit fan is to operate.
[Machine: Maintenance]
For details about the following items, see page 35 "[Machine: Maintenance]".
No. Item Description
0301 [Execute Cleaning Initial
Setting]
Initialize the cleaning unit for the photoconductor unit
(PCU).
0302 [Execute Process Initial
Setting]
Initialize print settings at once.
2. Details of Menu Items in Adjustment Settings for Skilled Operators
18
To Next Page
Loading...
