No. Item Description
0413 [Adjust Claw Shift for
Center Folding]
Adjust the paper alignment in the paper feed direction
for center folding.
Adjust this setting if the paper alignment in the paper
feed direction is inaccurate because of inconsistent
paper size and paper curling when using certain types of
paper.
0501 [Adjust Staple Position] Adjust the vertical position of the staples when using
Finisher SR4110.
0502 [Adjust Punch Position With
Feed Direction]
Adjust the horizontal position of the punch holes when
using Finisher SR4110.
0503 [Paper Alignment for
Stapling Across Feed
Direction]
Adjust the width of the staple jogger for edge stapling in
order to reduce vertical variation in paper alignment due
to difference in size, thickness, and paper curl when
using Finisher 4110.
0504 [Paper Alignment for
Stapling With Feed
Direction]
Adjust the travel distance of the paper edge stopper for
edge stapling in order to reduce horizontal variation in
paper alignment due to difference in size, thickness, and
paper curl when using Finisher SR4110.
0505 [Paper Alignment in Shift
Tray Across Feed Direction]
Adjust the width of the paper alignment jogger in the shift
tray in order to reduce vertical variation in paper
alignment due to difference in size, thickness, and paper
curl when using Finisher SR4110.
[Finishing: Fold]
For details about the following items, see page 55 "[Finishing: Fold]".
No. Item Description
0601 [Half Fold Position (Multi-
sheet Fold)]
Adjust the fold position of half folded sheets when using
the multi-folding unit.
0602 [Letter Fold-out Position 1
(Multi-sheet Fold)]
Adjust the fold position for the bottom segment of letter
fold-out sheets when using the multi-folding unit.
0603 [Letter Fold-out Position 2
(Multi-sheet Fold)]
Adjust the overall fold size of letters fold-out sheets when
using the multi-folding unit.
Menu Items and Functions
21
To Next Page
Loading...
