Ricoh PRO C7200X

1.SC Codes
154
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
 Reconnect the connectors.
 Replace the harnesses.
 Replace the Main Board.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC720-12
D
Transport Motor Error 3 (Downstream From Punch Unit)
Same as SC720-10
Same as SC720-10
 Replace the Junction Gate Transport Motor.
 Reconnect the connectors.
 Replace the harnesses.
 Replace the Main Board.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC720-13
D
Transport Motor Error 4 (registration)
Same as SC720-10
Same as SC720-10
 Replace the Registration Motor.
 Reconnect the connectors.
 Replace the harnesses.
 Replace the Main Board.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC720-
15
B
Transport Motor Error 6 (Pre-stack)
DC motor drive software detected an error (this SC issues immediately at 1
st
occurrence).
 Motor defective
 Connecter disconnected
 Overload
 Encoder defective
 Replace the Pre-stack Motor
 Reconnect the connectors.
 Replace the harnesses.
 Replace the Main Board.