Original orientation and punch hole position
Place all the originals in the ADF in the orientation in which they can be read normally. When placing
the original on the exposure glass, keep the same orientation, but set the original facing downwards.
The relationship between the orientation in which you place the original and the punch hole positions
is as follows:
ADF
Original location
Punching
position
*1
BZH094
Right Top Left
Exposure
glass
*1
The above table shows punching positioning. The orientation of the paper does not indicate direction of
delivery.
1. Place the originals.
2. Press [Output/ Customize Function/ Finisher].
3. Press [Finisher].
2. Basic Copying
106
To Next Page
Loading...
