2. Press [Output/ Customize Function/ Finisher].
3. Press [Finisher].
4. Select one of the binding positions.
When you select a binding position, Sort is automatically selected.
5. Press [OK].
6. Enter the number of copy sets using the number keys.
7. Specify any other copier functions that you require.
8. Press the [Start] key.
• When placing an original on the exposure glass, start with the first page to be copied. When placing
originals in the ADF, set so that the first page is on the top.
• When placing originals on the exposure glass, press the [ ] key after all the originals have been
scanned.
Punching copies for ring binding
Use this function to punch holes into copies so that those copies can be inserted into a ring bound booklet.
Finishing
105
To Next Page
Loading...
