2. Select the stamp position, and then press [OK].
Specifying the first printing page and start number (“P1,P2...”, “-1-,-2-...”, “P.1,P.2...
”, “1,2... ”)
Specify the first printing page and start number.
The example below shows when the first printing page is “2” and the start number is “3”.
In the following procedure, “P1, P2...” is selected, but the procedure is the same regardless of the format
you select.
1. Press [Change] under Change Numbering.
2. Press [First Printing Page], enter the original sheet number from which to start printing, and
then press [ ].
3. Press [First Printing Number], enter the number of page from which to start numbering with
the number keys, and then press [ ].
Stamps
177
To Next Page
Loading...
