Input / Output
Item Description
SADF Auto Reset In SADF mode, an original must be set within a specified time after the
previous original has been fed. You can adjust this time from 3 to 99
seconds in increments of 1 second.
Copy Eject Face Method
in Glass Mode
You can specify the way in which copies are delivered when copying
an original placed on the exposure glass.
Memory Full Auto Scan
Restart
When memory becomes full while scanning originals, the machine can
make copies of scanned originals first, and then automatically proceed
scanning remaining originals.
Sort / Stack Shift Tray
Setting
You can specify whether to shift the Shift Tray in sort mode or stack
mode.
Insert Separation Sheet You can specify the number of copy pages for inserting the separation
sheet from 1 to 999 pages in increments of 1 page.
Letterhead Setting If you select [Yes] in this function, the machine rotates the image
correctly.
Fore Edge Cut Setting Specify the length of the fore edge cut.
Staple Position Specify which staple type has priority to be shown on the initial display.
Punch Type Specify which punch type has priority to be shown on the initial display.
Ring Binding/Fold Type/
Stacker Output Tray
You can specify which ring binding types, fold types and stacker tray
have priority on the initial display.
Finisher: Staple Position Specify the stapling position.
Finisher: Punch Type Specify the punch type.
Finisher: Ring Binding
Type
You can specify which ring binding types have priority.
Simplified Screen:
Finishing Types
You can select which key is displayed with higher priority for “Finishing
Types” on the Simple Screen.
6. Appendix
270
To Next Page
Loading...
