20041904
10
Technical description of the burner
4.6 Maximum dimensions
The maximum dimensions of the burner are shown in Fig. 1.
Bear in mind that inspection of the combustion head requires the
burner to be opened and the rear part turned on the hinge.
The maximum dimensions of the open burner are indicated by
the L and R positions.
The l position is reference for the refractory thickness of the boiler
door.
Tab. I
mm A B C D E F G H I L R
RS 300/E BLU 1325 521 164 313 588 DN65 720 867 373 1175 1055
RS 400/E BLU 1325 521 164 313 588 DN65 775 867 373 1175 1055
RS 500/E BLU 1325 521 164 370 588 DN65 775 867 357 1175 1055
RS 650/E BLU 1325 549 164 363 588 DN80 835 867 397 1175 1055
RS 800/E BLU 1325 582 164 363 588 DN80 835 867 418 1175 1055