Riello RS 300/E BLU - 5.11.2 Gas Train; 5.11.3 Gas Train Installation

20041904
24
GB
Installation
5.11.2 Gas train
Type-approved in accordance with EN 676 and supplied sepa-
rately from the burner.
To select the correct model of the gas train, refer to the “burner-
gas train combination” manual supplied.
5.11.3 Gas train installation
DANGER
Disconnect the electrical power using the main
system switch.
Check that there are no gas leaks.
Beware of train movements: danger of crushing of
limbs.
Make sure that the gas train is properly installed
by checking for any fuel leaks.
The operator must use appropriate tools for instal-
lation.
Fig. 22
20065541