Rigol DG1012

RIGOL
© 2008 RIGOL Technologies, Inc.
User’s Guide for DG10× 2 Series
5-4
Minimum Rising
/Falling Time (Typical)
35ns
35ns
Jitter (RMS) (Typical)
6 ns + 30ppm
6 ns + 30ppm
Non-Volatile Storage
(Total:10 Waveforms)
10 waveforms
10 waveforms
Output
CH1
CH2
Amplitude
2 mV
PP
~ 10 V
PP
(50 )
4 mV
PP
~ 20 V
PP
(High Z)
2 mV
PP
~ 3 V
PP
(50 )
4 mV
PP
~6 V
PP
(High Z)
Amplitude Accuracy
(100 kHz Sine)
± (1% of setting + 1mV
PP
)
± (1% of setting+1 mV
PP
)
Amplitude Flatness
(Sine wave relative to
100kHz, 5V
PP
)
<100kHz 0.1 dB
<100kHz 0.1 dB
100kHz ~ 5MHz 0.15 dB
100kHz ~ 5MHz 0.15 dB
5MHz ~ 20MHz 0.3 dB
5MHz ~ 20MHz 0.3 dB
DC Offset
CH1
CH2
Range (DC)
5V (50)
10 V (High Z)
1.5V (50)
3 V (High Z)
Accuracy
± (1% of the |Offset Setting|
+ 1mV)
± (1% of the |Offset Setting|
+ 1mV)
Waveform Output
CH1
CH2
Impedance
50  typical
50  typical
Protection
Short-circuit protected
[1]
Short-circuit protected
[1]
AM (CH1)
Carrier Waveforms
Sine, Square, Ramp, Arb (Except DC)
Source
Internal/ External
Modulating Waveforms
Sine, Square, UpRamp, DnRamp,Triangle, Noise, Arb
(2mHz to 20kHz)
Depth
0% ~ 120%
FM (CH1)
Carrier Waveforms
Sine, Square, Ramp, Arb (Except DC)
Source
Internal/ External
Modulating Waveforms
Sine, Square, UpRamp, DnRamp,Triangle, Noise, Arb