Rigol DG1022

RIGOL DG1000 Command System
Programming Guide for DG1000
2-10
Detailed information of each command:
1. FUNCtion
Syntax FUNCtion {SINusoid|SQUare|RAMP|PULSe|NOISe|DC|USER}
Function Select the output function for CH1.
Explanation If FUNC DC is sent first and then FUNC USER, the output is still
DC.
Example FUNC SIN
2. FUNCtion?
Syntax FUNCtion?
Function Query the output function of CH1.
Explanation The query always returns CH1:ARB after sending FUNC DC or
FUNC USER.
Example The query returns CH1:SIN, CH1:SQU, CH1:RAMP, CH1:PULS,
CH1:NOIS or CH1:ARB, the default is CH1:SIN.
3. FUNCtion:USER
Syntax FUNCtion:USER {<name of arbitrary wave>|VOLATILE}
Function Select any wave from built-in arbitrary waves,10 user-defined
waves or waves that have been downloaded into volatile memory
for CH1.
Explanations  The built-in waves contain:
Common:
NegRamp/AttALT/AmpALT/StairDown/StairUp/StairUD/Cpulse/
PPulse/NPulse/Trapezia/RoundHalf/AbsSine/AbsSineHalf/
SINE_TRA/SINE_VER
Math:
Exp_Rise/Exp_Fall/Tan/Cot/Sqrt/X
∧
2/Sinc/Gauss/HaverSine/
Lorentz/Dirichlet/GaussPulse/Airy
Project:
Cardiac/Quake/Gamma/Voice/TV/Combin/BandLimited/
Stepresponse/Butterworth/Chebyshev1/ Chebyshev2
Window Function:
Boxcar/Barlett/triang/Blackman/Hamming/Hanning/Kaiser
Others:
Roundpm/DC