Rigol DG1022

DG1000 Command System RIGOL
Programming Guide for DG1000
2-1
Chapter 2 DG1000 Command System
This chapter gives detailed information of each command supported by DG1000,
including command syntax, function description, using considerations as well as some
application examples.
DG1000 contains following command sub-systems:
 IEEE 488.2
 APPLy
 FUNCtion
 FREQuency
 VOLTage
 OUTPut
 PULSe
 AM
 FM
 PM
 FSKey
 SWEep
 TRIGger
 BURSt
 DATA
 MEMory
 SYSTem
 PHASe
 DISPlay
 COUPling
 COUNter