Application Examples RIGOL
Programming Guide for DG1000
Chapter 3 Application Examples
This chapter shows you how to realize the examples in DG1000 User’s Guide via
commands, you can compare it with the introduction in User’s Guide to get deeper
understanding of the usage of commands.
The number before every command in these examples is not the content of command.
The content enclosed in “ / * ” and “ * / ” behind every command is note (not a part of
the command) which is used to assist user to understand the command well.
Before executing every example, please make sure that all the corresponding devices
have been connected correctly.
To Next Page
Loading...
