Rigol DG1022

RIGOL DG1000 Command System
Programming Guide for DG1000
2-68
COUNter
COUNter commands are used to enable the counter and set or query related
parameters.
DG1000 supports following COUNter commands:
1. COUNter
2. COUNter:COUPling
3. COUNter:COUPling?
4. COUNter:SENSitivity
5. COUNter:SENSitivity?
6. COUNter:TLEVel
7. COUNter:TLEVel?
8. COUNter:HFRS
9. COUNter:HFRS?
10. COUNter:FREQuency?
11. COUNter:PERiod?
12. COUNter:DCYCle?
13. COUNter:POSWidth?
14. COUNter:NEGWidth?