RIGOL
Programming Guide for DG1000
Structure of this Document
Chapter 1 Programming Overview
This chapter introduces how to programme DG1000 generator using commands and
how to input the commands in right format.
Chapter 2 DG1000 Command System
This chapter gives detailed information of each command supported by DG1000,
including command syntax, function description, considerations when using command
as well as some application examples.
Chapter 3 Application Examples
This chapter shows you how to realize the examples in DG1000 User’s Guide via
commands.
Appendix: Commands Reference A-Z
The Appendix lists all the commands
alphabetically in favor of quick reference.
Note:
DG1000 series Dual-channel Function/Arbitrary Waveform Generator includes DG1022
and DG1022A. In this manual, DG1022 is taken as an example to illustrate the
command system and its using method.
To Next Page
Loading...
