Rigol DG1022

DG1000 Command System RIGOL
Programming Guide for DG1000
2-63
Detailed information of each command:
1. PHASe
Syntax PHASe {<angle>|MINimum|MAXimum}
Function Set the initial phase of signals output from CH1.
Explanation <angle> is the phase set by users, the default unit is degree.
MIN=-180°, MAX=180°。
Return Value PHAS 90
2. PHASe?
Syntax PHASe? [MINimum|MAXimum]
Function Query the initial phase of signals output from CH1.
Return Value The query returns any numerical value between -180 and 180,
such as: 90.000.
3. PHASe:CH2
Syntax PHASe:CH2 {<angle>|MINimum|MAXimum}
Function Set the initial phase of signals output from CH2.
Explanation <angle> is the phase set by users, the default unit is degree.
MIN=-180, MAX=180.
Return Value PHAS:CH2 90
4. PHASe:CH2?
Syntax PHASe:CH2? [MINimum|MAXimum]
Function Query the initial phase of signals output from CH2.
Return Value The query returns any numerical value between -180 and 180,
such as: 90.000.
5. PHASe:ALIGN
Syntax PHASe:ALIGN
Function Enable the align phase output of dual channels.