Rigol DG1022

RIGOL DG1000 Command System
Programming Guide for DG1000
2-66
Detailed information of each command:
1. COUPling
Syntax COUPling {OFF|ON}
Function Enable or disable coupling function.
Example COUP OFF
2. COUPling?
Syntax COUPling?
Function Query the coupling state.
Return Value The query returns OFF or ON.
3. COUPling:BASEdchannel
Syntax COUPling:BASEdchannel{:CH1|:CH2}
Function Select the base channel of channel coupling.
Example COUP:BASE:CH1
4. COUPling:BASEdchannel?
Syntax COUPling:BASEdchannel?
Function Query the base channel selected.
Return Value The query returns CH1 or CH2.
5. COUPling:PHASEDEViation
Syntax COUPling:PHASEDEViation <value>
Function Set the phase deviation of channel coupling, the default
unit is
degree.
Explanation <value>: -180° to 180
Example COUP:PHASEDEV 10
6. COUPling:PHASEDEViation?
Syntax COUPling:PHASEDEViation?
Function Query the phase deviation.
Return Value The query returns the phase deviation in scientific notation and the
default unit is degree, such as: 1.000000e+01.
7. COUPling:FREQDEViation
Syntax COUPling:FREQDEViation <value>