Rigol DS8000-R Series

Chapter 12 Reference Waveform RIGOL
DS8000-R User Guide 12-1
Chapter 12 Reference Waveform
DS8000-R series oscilloscope provides 10 reference waveform positions (Ref1-Ref10).
In the actual test process, you can compare the signal waveform with the reference
waveform to locate the failure.
Contents in this chapter:
◼ To Enable Ref Function
◼ To Select the Reference Channel
◼ To Select the Ref Source
◼ To Adjust the Ref Waveform Display
◼ To Save to Internal Memory
◼ To Clear the Display of the Reference Waveform
◼ To View Details of the Reference Waveform
◼ To Reset the Reference Waveform
◼ Color Setting
◼ Label Setting
◼ To Export to Internal or External Memory
◼ To Import from Internal or External Memory
◼ Binary Data Format (.bin)