RIGOL Chapter 19 System Utility Function Setting
19-16 DS8000-R User Guide
⚫ Operation Type
Click Operation to select "All Measure".
⚫ All Measurement
Click All Measure to select the desired measurement channel. The available
measurement channels include OFF and CH1-CH4.
5. Statistics Reset
When the Quick shortcut key is set to "Stat Reset", click Quick at the right
section of the operation interface in the Web Control page to make statistics
reset of measurement or pass/fail test reset.
⚫ Operation Type
Click Operation to select "Stat Reset".
⚫ Statistics Reset
Click Stat Reset to select the function that requires statistics reset. You can
select "Measure" or "PassFail".
6. Print
When the Quick shortcut key is set to "Print", click Quick at the right section of
the operation interface in the Web Control page to print the screen image of the
oscilloscope.
Click Operation to select "Print".
7. Email
When the Quick shortcut key is set to "Email", click Quick at the right section of
the operation interface in the Web Control page to send the file through email.
Click Operation to select "Email".
8. Record
When the Quick shortcut key is set to "Record", click Quick at the right section
of the operation interface in the Web Control page to record the waveform.
Click Operation to select "Record".
9. Save Group
When the Quick shortcut key is set to "Save Group", click Quick at the right
section of the operation interface in the Web Control page to save group.
⚫ Operation Type
Click Operation to select "Save Group".
⚫ Storage Option
To Next Page
Loading...
