RIGOL Chapter 2 Front Panel Operations
2-68 M300 User’s Guide
View Switch
M300 provides view switch function which provides multiple display forms for the
scan list and scan results. Press
at the front panel to display the scan history
information, channel status table, measurement curve and the channel information.
Scan History Information
Press
at the front panel to enter the scan history information interface
through which you can view the start time, scan sweep, count, channel number and
the corresponding function as well as the maximum, minimum, average and
standard deviation measured. You can also store/read the measurement data and
view the measurement value of the specified channel.
Note: When the count reaches to 100000, the new readings will overwrite the first
readings stored.
Figure 2-32 Scan History Information
1 Read
Read the measurement data stored in the internal or external memory. Press
Read and the instrument enters the store and recall interface (the file type is
set to “Meas Data” automatically). Please refer to “
Store and Recall” to select
the desired file to read.
2 Save
Save the measurement data into the internal or external memory. Press Save
and the instrument enters the store and recall interface (the file type is set to
To Next Page
Loading...