Chapter 2 Front Panel Operations RIGOL
M300 User’s Guide
count, trigger mode, interval for auto trigger mode and trigger edge type for
external trigger) and the channel configurations (including measurement
configuration, scalling configuration, alarm configuration and advanced
configuration).
3 Mirror Configuration
Combine the “System Configuration” and “Measurement Configuration” files
into one file (with the suffix “.mir”) and store it in the internal memory or the
external USB storage device. The mirror configuration is the combination of the
system configuration and the measurement configuration.
4 Measurement Data
Store the current measurement data as a file with the suffix “.dat” or “.csv” into
the internal memory or external USB storage device.
Note: The file with the suffix “.csv” can only be stored in the USB storage
device.
Internal Storage
The internal C: disk holds 256 Mbytes storage space and can store four types of files,
including system configuration, measurement configuration and measurement data
(only “.dat” file).
Note: When executing internal storage for the first time, please format C: disk.
External Storage
The D: disk can store four types of files, including system configuration,
measurement configuration, mirror configuration and measurement data (“.dat” or
“.csv” file), according to its capacity.
Before using the external storage, insert the USB storage device into the USB Host
interface at the front panel. When the instrument detects the USB storage device,
will be displayed in the screen status bar.
When executing operations in the D: disk storage area, do not remove the
To Next Page
Loading...