RIGOL Chapter 2 Front Panel Operations
2-20 M300 User’s Guide
Advanced Configuration
The fourth step of the channel configuration guide: configure the advanced
measurement parameters relating to the function selected.
Figure 2-7 Advanced Configuration
The advanced parameters to be configured differ when different function is selected
in the “Measurement Configuration” interface for the current channel.
1 Multiplexer Channel
According to the function currently selected, you need to configure the
integration time, DC impedance, auto zero, etc. For details, please refer to
“Measurement Parameter Configuration”.
2 DIO Channel
Select coding mode for the current DIO channel (refer to “Digital Input”).
3 TOT Channel
Set the reading mode for the current TOT channel (refer to “Totalizer”).
To Next Page
Loading...