Rigol M300 Series - Power Switch

RIGOL Chapter 2 Front Panel Operations
2-84 M300 User’s Guide
Separator
Use the up/down direction keys to select Separator and use the left/right direction
keys to set the display form of the separator of the screen data to “
” (or “ ”), “None”
or “Space”.
Tip:
The display form of the decimal point affects the display form of the separator. The
two cannot be set to “ ” or “ ” at the same time. There are 6 kinds of data formats.
Decimal Point
Separator
Example
10.000,00
Space
10.000 00
None
10.00000
10,000.00
Space
10,000 00
None
10,00000
Power Switch
Use the up/down direction keys to select PwrSW and use the left/right direction
keys to select “ON” or “OFF” to set whether the front panel power key is valid. The
default is “OFF”.
 ON: the front panel power key is valid. After power-on, you need to press the
front panel power key to start the instrument.
 OFF: the front panel power key is invalid. After power-on, the instrument starts
automatically. But, you can still use the front panel power-key to turn off the
instrument.