Rigol M300 Series - Store and Recall

Chapter 2 Front Panel Operations RIGOL
M300 User’s Guide
2-73
Store and Recall
M300 allows you to save the system configuration, measurement configuration and
measurement data into the internal or external memory and recall them when
required. Press Store/Recall to enter the interface as shown in the figure below.
Figure 2-36 Store and Recall
1 File Type
Display the four file types of M300 storage and recall. You can select the desired
file type using the left/right direction key.
2 Current Directory
Dispay the directory currently selected. In the interface displayed by default
when Store/Recall is pressed, this area is empty.
To select the specified directory, please execute the following operation in the
interface as shown in Figure 2-37.
1) Select the desired drive letter (C: or D:) using the up/down direction key
and press OK; for example, D:.
2) Select the desired folder under this drive letter using the up/down direction
key and press OK; for example, RIGOL.
At this point, the current directory area displays D:\RIGOL\.
3 Directory/File
Display the files and folders under the current directory. In the interface
displayed by default when Store/Recall is pressed, this area displays the drive
Directory/File File Type Current Directory