RIGOL Chapter 2 Front Panel Operations
2-78 M300 User’s Guide
System Setting
Press Utility and the instrument enters the system configuration interface by
default (or press Utility System).
Date
Use the up/down direction keys to select Date and use the numeric keyboard to set
the system date. The format is as follows.
YYYY-MM-DD
Wherein,
YYYY denotes “Year” and the range is from 2001 to 2099;
MM denotes “Month” and the range is from 01 to 12;
DD denotes “Date” and the range is from 01 to 28, 29, 30 or 31 (related to the YYYY
and MM currently set).
Time
Use the up/down direction keys to select Time and use the numeric keyboard to set
the system time. The format is as follows.
hh:mm:ss
Wherein,
hh denotes “Hour” and the range is from 00 to 23;
mm denotes “Minute” and the range is from 00 to 59;
ss denotes “Second” and the range is from 00 to 59.
The date and time forms the system time. The instrument stores the measurement
data and alarm data with the time stamp during a scan. In absolute trigger mode,
the instrument triggers when the system time reaches the specified time.
Language
M300 supports Chinese and English menus and built-in help systems. All the
messages and help information are displayed in the language selected. Use the
up/down direction keys to select Language and use the left/right direction keys to
select the desired language.
To Next Page
Loading...