RIGOL Chapter 2 Front Panel Operations
2-74 M300 User’s Guide
letter (C: and/or D:). The C: disk is the local disk with 256 Mbytes storage space.
The D: disk is the external USB storage device (it will only be displayed when an
USB storage device is connected). Use the up/down direction key to select the
desired file, folder or drive letter.
Menu Explanations:
1 Format
Press Format to delete all the data under the corresponding directory. This
menu is only available when C: disk is currently selected.
2 Read
Press Read to read the file currently selected. This menu is valid only when the
specified type of file is selected.
Note: Before reading a system configuration file, make sure that the module
currently inserted and the module used when storing the configuration file is of
the same type.
3 Save
Press Save to enter the filename input area. This menu is valid only when the
current directory can store the specified type of file.
4 Delete
Press Delete to remove the file currently selected. This menu is only valid the
specified type of file is selected.
File Type
You can store or read various types of files.
1 System Configuration
Store the current system configuration as a file with the suffix “.sfg” into the
internal memory or external USB storage device.
The system configuration saves the states of all the modules, including all the
system information (under Utility System) except date and time and the
configurations of the I/O interfaces (under Utility I/O).
2 Measurement Configuration
Store the current measurement configuration as a file with the suffix “.mfg” into
the internal memory or external USB storage device.
The measurement configuration saves the scan list settings (including trigger
To Next Page
Loading...