Chapter 4 Remote Control RIGOL
M300 User’s Guide
5 Communication test
Right click the resource name “M300(TCPIP::172.16.3.21::INSTR)” to select
“SCPI Panel Control” to turn on the remote command control panel through
which you can send commands and read data.
6 Load LXI webpage
As this instrument conforms to LXI Core 2011 Device standards, you can load
the LXI webpage through Ultra Sigma (right-click the resource name and select
LXI-Web; or directly input the IP address in the browser). Information about the
instrument (model, manufacturer, serial number, description, MAC address and
IP address) will be displayed on the webpage.
To Next Page
Loading...