Rigol M300 Series - Page 175

Chapter 6 Specifications RIGOL
M300 User’s Guide
6-11
Volt-Hertz Limit
10
8
10
8
10
8
10
8
10
8
10
8
Other
T/C Cold Junction
Accuracy (Typical)
0.8℃ 0.8℃ 0.8℃
[7]
0.8℃
-- --
Switch Life (No
Load) (Typical)
100M 100M 100M 100M 100M 100M
Switch Life (Rated
Load) (Typical)
[8]
100K 100K 100K 100K 100K 100K
Operating
Temperature
0
℃
- 55
℃
0
℃
- 55
℃
0
℃
- 55
℃
0
℃
- 55
℃
0
℃
- 55
℃
0
℃
- 55
℃
Storage Temperature
-20
℃
– 70
℃
-20
℃
– 70
℃
-20
℃
– 70
℃
-20
℃
– 70
℃
-20
℃
– 70
℃
-20
℃
– 70
℃
Humidity
(non-condensing)
40
℃
/ 80% RH
40
℃
/80% RH
40
℃
/80% RH
40
℃
/80% RH
40
℃
/80% RH
40
℃
/80% RH
[1]
The 20-channel multiplexer can be used as 20 two-wire measurement channels or 10 four-wire measurement channels. The 32-channel
multiplexer can be used as 32 two-wire measurement channels or 16 four-wire measurement channels.
[2]
The 2 groups of channels (32 channels per group) of the 64-channel multiplexer use the same LO terminal.
[3]
The 24-channel multiplexer can be used as 20 two-wire measurement channels or 10 four-wire measurement channel and 4 current channels.
[4]
Integration time: 0.02PLC, channel delay: 0, auto zero: off, alarm: off, scaling: off, display: off, data to internal memory.
[5]
Matching impedance is 50Ω.
[6]
The isolation between banks is greater than 40dB.
[7]
The thermocouple precision of this module depends on the LO setting rather than the temperature of the cold terminal.
[8]
Only for resistive loads.